|
[Sponsors] |
[ANSYS Meshing] Meshing a spacer grid or baffle |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
April 30, 2014, 07:55 |
Meshing a spacer grid or baffle
|
#1 |
New Member
Join Date: Mar 2014
Posts: 8
Rep Power: 12 |
I decided to simulate flow in a fuel assembly in ansys. but i didn't know how to add spacer grids.
i investigated 2 method: 1. adding spacer grids as a solid by a thickness. it cause to have problems in meshing process. 2. cut spacer grid solid phase from geometry it cause too many part and again meshing problem 3. use of non-conformal mesh and hence interfaces near spacer grid phase. 4. I heard that i can add spacer grids as a zero-thikness faces but i dont know is there any one who help me find my way. thanks. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] handling of baffle regions or surfaces with zero thickness with snappyHexMesh | StSchiff | OpenFOAM Meshing & Mesh Conversion | 5 | March 8, 2017 09:45 |
Boundary baffle error 258 | Nalleli | Siemens | 2 | November 19, 2006 13:14 |
Grid adaption or Gambit meshing? | ravi varma | FLUENT | 8 | December 12, 2002 13:09 |