CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[ANSYS Meshing] Connecting Keypoints to Areas / Skins

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 9, 2014, 16:56
Default Connecting Keypoints to Areas / Skins
  #1
vhp
New Member
 
V
Join Date: Apr 2014
Posts: 2
Rep Power: 0
vhp is on a distinguished road
Hello,

I am trying to make a wing model in ANSYS. I have made ribs, skin, and spars. After meshing, when I apply a load to the wing I am having the problem that the spars do not stay attached to the wing. The wing deflects, and the ribs deflect with the skin, but the spars start sticking out - as in they do not deflect with the whole assembly. Does anyone have any tips on how I can attach these spars to the area of the tip airfoil?
vhp is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
connecting rod analysis sahil patel Main CFD Forum 0 May 17, 2013 08:33
hot-spots and cold areas where they shouldn't be miriam@efg Phoenics 1 June 14, 2012 05:58
[Other] Connecting 3D bodies in Ansys Design Modeler chipper ANSYS Meshing & Geometry 3 June 19, 2010 09:46
Cross-sectional Areas ravids Main CFD Forum 1 October 16, 2009 13:09
flux through individual cells / face areas Mike FLUENT 2 February 16, 2009 11:43


All times are GMT -4. The time now is 07:35.