CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] ICEM Prism interaction with multiple edges (https://www.cfd-online.com/Forums/ansys-meshing/140101-icem-prism-interaction-multiple-edges.html)

QCFD August 7, 2014 17:08

ICEM Prism interaction with multiple edges
 
Hi,

I am generating a mesh which includes many internal 2-D Baffle surfaces. There are heat exchangers up against the baffles which need to be prismed.

I am having difficulty with ICEM terminating the prisms by stair stepping rather than terminating up against the baffle (resulting in quads). Is there a prism setting (or other setting, or surface orientation solution) which will allow the prism to terminate by colliding with the thin baffle?

The angles are all 90 degree so this should be fairly straightforward for ICEM to handle.

Regards

Eugeniya December 25, 2014 07:54

hello!
tell please, you solved this problem? If yes, that as?
thanks


All times are GMT -4. The time now is 05:43.