[ICEM] ICEM Prism interaction with multiple edges

QCFD · August 7, 2014, 16:08

Hi,

I am generating a mesh which includes many internal 2-D Baffle surfaces. There are heat exchangers up against the baffles which need to be prismed.

I am having difficulty with ICEM terminating the prisms by stair stepping rather than terminating up against the baffle (resulting in quads). Is there a prism setting (or other setting, or surface orientation solution) which will allow the prism to terminate by colliding with the thin baffle?

The angles are all 90 degree so this should be fairly straightforward for ICEM to handle.

Regards

Eugeniya · December 25, 2014, 06:54

hello!
tell please, you solved this problem? If yes, that as?
thanks

August 7, 2014, 16:08	ICEM Prism interaction with multiple edges	#1
QCFD New Member Daniel Wilde Join Date: Jan 2014 Posts: 21 Rep Power: 12	Hi, I am generating a mesh which includes many internal 2-D Baffle surfaces. There are heat exchangers up against the baffles which need to be prismed. I am having difficulty with ICEM terminating the prisms by stair stepping rather than terminating up against the baffle (resulting in quads). Is there a prism setting (or other setting, or surface orientation solution) which will allow the prism to terminate by colliding with the thin baffle? The angles are all 90 degree so this should be fairly straightforward for ICEM to handle. Regards

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
how to set periodic boundary conditions	Ganesh	FLUENT	15	November 18, 2020 06:09
problem with surface creation in ICEM from multiple curves	dialolema	ANSYS Meshing & Geometry	2	October 27, 2014 13:14
OpenFOAM static build on Cray XT5	asaijo	OpenFOAM Installation	9	April 6, 2011 12:21
[snappyHexMesh] external flow with snappyHexMesh	chelvistero	OpenFOAM Meshing & Mesh Conversion	11	January 15, 2010 19:43
ICEM 5.1 to CFX Prism Element	ashish	CFX	1	April 6, 2005 18:32

December 25, 2014, 06:54		#2
Eugeniya New Member Eugeniya Join Date: Dec 2014 Posts: 1 Rep Power: 0	hello! tell please, you solved this problem? If yes, that as? thanks