CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[ANSYS Meshing] Mesh quality

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 24, 2014, 14:30
Default Mesh quality
  #1
New Member
 
siddharth hans
Join Date: Sep 2014
Posts: 4
Rep Power: 2
hans.siddharth is on a distinguished road
Hi guys, are mesh aspect ratio, orthogonal quality and skewness the only factors at the end of the day which decide whether a mesh is good or not? If no what are the other factors?
Pardon me if this is a stupid question. Just a beginner
hans.siddharth is offline   Reply With Quote

Old   October 27, 2014, 11:09
Default
  #2
Senior Member
 
amin.z's Avatar
 
Amin
Join Date: Oct 2013
Location: Somewhere on Earth
Posts: 285
Rep Power: 5
amin.z is on a distinguished road
Quote:
Originally Posted by hans.siddharth View Post
Hi guys, are mesh aspect ratio, orthogonal quality and skewness the only factors at the end of the day which decide whether a mesh is good or not? If no what are the other factors?
Pardon me if this is a stupid question. Just a beginner
Hey!
All of them are important! If you read ANSYS meshing manual you will find some helpful guidance!
__________________
Best regards,
Amin
amin.z is offline   Reply With Quote

Old   October 27, 2014, 11:12
Default
  #3
New Member
 
siddharth hans
Join Date: Sep 2014
Posts: 4
Rep Power: 2
hans.siddharth is on a distinguished road
Thanks alot amin! Will do that.
hans.siddharth is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
No layers in a small gap bobburnquist OpenFOAM Native Meshers: snappyHexMesh and Others 2 November 25, 2012 09:54
Polyhedral Mesh Quality in Star-CCM+ niazaliahmed STAR-CCM+ 3 March 8, 2012 14:51
[ICEM] Tetra mesh quality before and after prism layer Chander ANSYS Meshing & Geometry 0 December 25, 2011 23:04
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55
Icemcfd 11: Loss of mesh from surface mesh option? Joe CFX 2 March 26, 2007 18:10


All times are GMT -4. The time now is 18:36.