[DesignModeler] FlowPath & ExportPoints Addin?

Norflow · January 26, 2015, 10:46

I recently updated to R15, and after opening a previous project DM containing FlowPath & ExportPoints features, I am prompted with the error posted below.

All of my licenses are active, Beta Options are on and the BladeEditor addin is loaded. However, I can't see the FlowPath or ExportPoints feature anymore in DM. Can anyone shed some light on this issue?

Thanks.

Norflow · January 26, 2015, 10:48

This is the error message:

Norflow · January 26, 2015, 11:39

SOLUTION:

Tools > License Preferences ... Geometry Tab. Make sure BladeModeler is above DesignModeler in the list by using the "Move Up" button.

mahyar.m · April 19, 2016, 06:14

Quote:

Originally Posted by Norflow

This is the error message:

I've got the same problem and I have already set the license preference accordingly (blademodeler is on the top).
Can anyone contribute to that ?

January 26, 2015, 10:46	FlowPath & ExportPoints Addin?	#1
Norflow New Member fluhid Join Date: Aug 2011 Posts: 21 Rep Power: 14	I recently updated to R15, and after opening a previous project DM containing FlowPath & ExportPoints features, I am prompted with the error posted below. All of my licenses are active, Beta Options are on and the BladeEditor addin is loaded. However, I can't see the FlowPath or ExportPoints feature anymore in DM. Can anyone shed some light on this issue? Thanks.

January 26, 2015, 11:39	Solution!	#3
Norflow New Member fluhid Join Date: Aug 2011 Posts: 21 Rep Power: 14	SOLUTION: Tools > License Preferences ... Geometry Tab. Make sure BladeModeler is above DesignModeler in the list by using the "Move Up" button.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ANSYS Meshing] problem about flowPath feature in bladEditor	Aysiyi	ANSYS Meshing & Geometry	3	January 21, 2014 10:33
[DesignModeler] import geometry and define flowpath	Polito	ANSYS Meshing & Geometry	1	October 25, 2013 06:31
CDAtransonic calculation,but ma from the middle flowpath to outlet is above 1.	shouhuopxm	Main CFD Forum	0	November 10, 2011 02:22
CDAtransonic calculation,but ma from the middle flowpath to outlet is above 1.	shouhuopxm	Fidelity CFD	0	November 9, 2011 07:26