CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[ICEM] DesignModeler to ICEM , .tin problem.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 15, 2015, 10:38
Default DesignModeler to ICEM , .tin problem.
  #1
New Member
 
Join Date: Oct 2015
Posts: 24
Rep Power: 3
Kosmosisy is on a distinguished road
Hello.I have been trying to import parasolid geometry which I created from designmodeler to ICEM CFD.But the problem is .tin file is not created,I tried to change working directory but nothing happened.Instead of parasolid,if I export step or iges format and import to icem,its creates .tin file. What is the problem about that parasolid file?
Kosmosisy is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem with cyclic boundaries in Openfoam 2.3, mesh import from ICEM Scabbard OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 19 September 24, 2016 14:02
Problem with usnstruct mesh Icem Tribometer obliz ANSYS 0 July 10, 2014 03:09
[ICEM] ICEM problem when doing not so fine mesh DudaAPD ANSYS Meshing & Geometry 0 April 30, 2014 16:59
problem exporting from icem to fluent jc_muaddib FLUENT 1 June 16, 2010 04:16
Problem exporting big meshes from ICEM to Fire Emil CFX 0 October 10, 2008 13:06


All times are GMT -4. The time now is 07:19.