CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ANSYS Meshing] ASCII export Format - mesh connectivity

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 23, 2016, 05:24
Arrow ASCII export Format - mesh connectivity
  #1
Member
 
Gowain
Join Date: May 2014
Location: Ireland
Posts: 86
Rep Power: 11
eaglemckenna is on a distinguished road
Hi,
I need to understand how the nodes in my mesh are connected. I am exporting data from FLUENT in ASCII format and it is important I understand how the structure of the mesh is ordered.
I using this data to form a reduced order model of a CFD RANs solution within MATLAB - I then need to convert this format, same as ASCII as SVD does not change the order, into TECPLOT to view for post processing.

Alternatively, it would be even better if I could just import the approximated solution data from MATLAB still having the ASCII format back into the results tab in ANSYS workbench for post processing and rigorous error analysis.

I do hope some of you can be of help.

best wishes

g
eaglemckenna is offline   Reply With Quote

Reply

Tags
connectivity, formats, import problem

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Other] ANSYS to Fluent mesh export in ASCII format johannes ANSYS Meshing & Geometry 64 October 19, 2021 21:13
mesh export to gmsh format Kelomari enGrid 0 September 22, 2015 20:35
[snappyHexMesh] No layers in a small gap bobburnquist OpenFOAM Meshing & Mesh Conversion 6 August 26, 2015 10:38
[Commercial meshers] how to export ASCII format from Gambit zese OpenFOAM Meshing & Mesh Conversion 2 January 10, 2014 06:09
Convergence moving mesh lr103476 OpenFOAM Running, Solving & CFD 30 November 19, 2007 15:09


All times are GMT -4. The time now is 05:08.