[ANSYS Meshing] body of influence is not meshed -- CFD Online Discussion Forums

July 15, 2016, 10:22	body of influence is not meshed	#1
Diger Senior Member Join Date: Nov 2015 Posts: 135 Rep Power: 10	So the green tip is the body of influence. This is a multibody consisting of 2 parts. The green tip and the lower part. I have set the green tip as body of influence and did like in this video: https://www.youtube.com/watch?v=3E1p1w32jt0 But the tip doesnt mesh only the lower part is recognized as a body... Choosing element-size instead of body-of-influence does work though.

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ANSYS Meshing] body of influence vs. contact region	Diger	ANSYS Meshing & Geometry	5	October 10, 2018 07:41
[ANSYS Meshing] Creating local sizings within a body of influence.	Euan001	ANSYS Meshing & Geometry	1	May 6, 2016 04:19
[ANSYS Meshing] body of influence for mesh method	Ema40	ANSYS Meshing & Geometry	0	April 21, 2016 07:22
[ANSYS Meshing] Body of Influence	MuhammadK	ANSYS Meshing & Geometry	3	January 8, 2016 01:27
[ANSYS Meshing] Inflation conflict betwee Automatic Meshed Body and Sweep Meshed Body	PvS	ANSYS Meshing & Geometry	2	June 26, 2011 14:22

All times are GMT -4. The time now is 13:42.