CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   gambit meshing 3d (http://www.cfd-online.com/Forums/ansys-meshing/32024-gambit-meshing-3d.html)

joda August 24, 2003 09:36

gambit meshing 3d
 
hello every body

i want to mesh mixing tank with two horizontal pipes for inlet and outlet at three dimensional. it has mixer too.

lenght of tank=2.5 meter(H=2 m) , diameter of tank=2 meter (D=2 m), diameter of section of inlet and outlet= 3 centi meter(d=3 cm)

how can i do structured mesh? How can i compose it.

thanks

cfdproject March 27, 2009 20:43

I need to add a mixing fan at the outlet so that I can get a uniform temperature at the outlet using gambit.
Does gambit has any option that I can choose?

paka March 30, 2009 02:43

Don't really on me, but I don't like Gambit, it cause some pains to me. I would recommend Pointwise.

cfdproject March 30, 2009 15:55

I do not have access to point wise..I have to work my way in gambit..does any body know how I can do it gambit
Thanks


All times are GMT -4. The time now is 04:52.