CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   Does anybody provide some cases of size-function griding? (http://www.cfd-online.com/Forums/ansys-meshing/62638-does-anybody-provide-some-cases-size-function-griding.html)

Conan March 16, 2009 05:13

Does anybody provide some cases of size-function griding?
 
My fluid 3D geometry is one cubic volume is subtracted some cylinders. I wanna the girds around circular cylindrs are finer while coarse far from cylinders. So, I think size function is needed. But, I dont know how to set up the parameters.

If anybody has some cases for teaching, please send me some. Thanks.

-mAx- March 16, 2009 08:15

easy :D
in size function, let fixed option
The sources will be your cylinder surfaces
The attachment is you substracted volume
The start size is the element's size of your refined surface
The grow rate should be set to 1.2 (but it can be less for a low transition, or more for a rapid one),
Max size is the global size of the elements.

you have more explanation in the help files

Fabio March 17, 2009 06:02

HI are those commands referred to Gambit?

-mAx- March 17, 2009 07:12

yes they are


All times are GMT -4. The time now is 03:23.