CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

Delauney Triangulation in Gambit

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 23, 2009, 15:11
Question Delauney Triangulation in Gambit
  #1
Member
 
Forrest's Avatar
 
Join Date: Mar 2009
Location: Texas
Posts: 32
Rep Power: 7
Forrest is on a distinguished road
I'm trying to mesh one half of a circle (one end of a pipe). I want to put a boundary layer mesh around the walls and then fill the remaining area of the surface with Delauney triangulation. I want the triangles to match the outer nodes of the boundary layer mesh and generate triangles of appropriate size near the BL mesh, and then grow to fill the rest of the area. How do I do this in Gambit? I haven't had any success at this with Tri/Pave.
Forrest is offline   Reply With Quote

Old   March 24, 2009, 04:23
Default
  #2
New Member
 
Christian J.
Join Date: Mar 2009
Posts: 4
Rep Power: 7
grisu is on a distinguished road
Should work using a sizing function type "meshed" - use the meshed boundarys as sources and a suitable growth factor, size limit big enough.
grisu is offline   Reply With Quote

Old   March 24, 2009, 17:51
Default
  #3
Member
 
Forrest's Avatar
 
Join Date: Mar 2009
Location: Texas
Posts: 32
Rep Power: 7
Forrest is on a distinguished road
Thanks a lot, that works great
Forrest is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Gambit help: Cube inside cube Jack Martinez FLUENT 13 August 11, 2010 07:29
Gambit -dev X11 doesn't work Ervin Amet FLUENT 0 October 28, 2007 10:33
Athlon 64 Gambit Compatibility? Derick FLUENT 3 January 17, 2006 18:28
between IDL Gambit and rhino, any help? philip FLUENT 0 June 23, 2005 13:08
Generating big meshes with GAMBIT on NT Andrew Ooi FLUENT 12 February 2, 2000 23:26


All times are GMT -4. The time now is 22:57.