CFD Online Discussion Forums

CFD Online Discussion Forums (
-   ANSYS Meshing & Geometry (
-   -   Cooper Scheme Question (w/pics) (

Forrest March 24, 2009 18:34

Cooper Scheme Question (w/pics)
2 Attachment(s)
I want to use the cooper scheme to sweep the mesh shown in the picture title "source-mesh". The source mesh consists of a boundary layer mesh next to the cylindrical part of the face, and a size-function constrained unstructured mesh to fill the rest of the face. When I use the Cooper scheme it deforms my boundary layer mesh as shown in the picture "cooper-result". The final mesh project should be the same as the source mesh. How can I keep this from happening? Thanks in advance.

-mAx- March 26, 2009 15:02

On the second picture, I would pick and mesh the parallel edges (by pair) on both sides form the cylinder.
It will enforce Gambit to keep the same ratio for both edges from the pair

Forrest March 26, 2009 16:19

Thanks, that got it to work. I appreciate the help you've been giving me.

All times are GMT -4. The time now is 16:42.