Cooper Scheme Question (w/pics)

Forrest · March 24, 2009, 17:34

I want to use the cooper scheme to sweep the mesh shown in the picture title "source-mesh". The source mesh consists of a boundary layer mesh next to the cylindrical part of the face, and a size-function constrained unstructured mesh to fill the rest of the face. When I use the Cooper scheme it deforms my boundary layer mesh as shown in the picture "cooper-result". The final mesh project should be the same as the source mesh. How can I keep this from happening? Thanks in advance.

-mAx- · March 26, 2009, 14:02

On the second picture, I would pick and mesh the parallel edges (by pair) on both sides form the cylinder.
It will enforce Gambit to keep the same ratio for both edges from the pair

Forrest · March 26, 2009, 15:19

Thanks, that got it to work. I appreciate the help you've been giving me.

March 26, 2009, 15:19		#3
Forrest Member Join Date: Mar 2009 Location: Texas Posts: 33 Rep Power: 17	Thanks, that got it to work. I appreciate the help you've been giving me. Last edited by Forrest; March 27, 2009 at 16:51.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
IMPRINT COMMAND IN COOPER MESHING SCHEME	TINA	FLUENT	3	October 7, 2006 05:03
GAMBIT - Cooper Scheme	JB	FLUENT	4	February 17, 2005 08:32
Question on Sediment Mass Conservation Scheme	Wen Long	Main CFD Forum	0	July 6, 2004 15:45
Error message on Cooper scheme mesh	Mnu & Luc	FLUENT	1	January 20, 2003 05:56
Scheme documentation and question	Mickaël Perrin	FLUENT	0	July 4, 2002 05:21

March 26, 2009, 14:02		#2
-mAx- Super Moderator Maxime Perelli Join Date: Mar 2009 Location: Switzerland Posts: 3,297 Rep Power: 41	On the second picture, I would pick and mesh the parallel edges (by pair) on both sides form the cylinder. It will enforce Gambit to keep the same ratio for both edges from the pair