CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   Volume Meshing of Cooling Vane in GAMBIT (http://www.cfd-online.com/Forums/ansys-meshing/64811-volume-meshing-cooling-vane-gambit.html)

Stamatis May 25, 2009 12:37

Volume Meshing of Cooling Vane in GAMBIT
 
3 Attachment(s)
Hello everyone,

I am new to the forum and to CFD. I am doing a project which requires modelling of a ventilated disc brake. I am trying to mesh it in GAMBIT.

The geometry can be seen in my first attachment. I am basically trying to mesh the faces around the cooling vane using a mapped mesh as seen in the second attachment.

The problem is that when I try to mesh the volume, the mesh appears "draped" or curved, as seen in the third attachment.

I am really novice to GAMBIT so could someone please let me know if this means a problematic mesh or is it simply a visual issue?

Any help towards rectifying the situation would be greatly appreciated. I have been scratching my head with this for 3 days now and don't know how to proceed.


Thank you very much for your time,

Stamatis :)

Stamatis May 25, 2009 13:28

PS. Could it be anything related to my geometry having fillets?
(i must not alter the geometry however...)


All times are GMT -4. The time now is 19:51.