CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   ICEM CFD - minor internal error, number of nodes don't match (http://www.cfd-online.com/Forums/ansys-meshing/65126-icem-cfd-minor-internal-error-number-nodes-dont-match.html)

Anorky June 4, 2009 10:41

ICEM CFD - minor internal error, number of nodes don't match
 
1 Attachment(s)
Hi everyone,

During blocking of my geometry the following error occurs:

A minor internal error has occurred.You may continue to work but if problems arise they may be related to this error. Try using the check/fix function to fix the problem. The following message was designed to aid developers fix the problem:
number of nodes don't match
2 new O-grid indices defined

I tried to work around this error in order to avoid the occurance but without succes. Does anyone knows the cause of this error and how to solve it?
I'm using a script file to create the geometry and blocking. In the figure attached you can see my blocking layout. I numbered the blocks according to sequence they were created in the script. The error occurs when block 8 is initialised.

Thanks in advance,


All times are GMT -4. The time now is 02:16.