CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   Problem connecting faces in Gambit (http://www.cfd-online.com/Forums/ansys-meshing/66814-problem-connecting-faces-gambit.html)

AcoidanBM July 24, 2009 15:05

Problem connecting faces in Gambit
 
Hi there,

I'm following the airplane Gambit tutorial to mesh my 3d automobile geometry, but I have a problem when I want to connect the symmetry faces. I don't know why, but sometimes it works well, and sometimes I get this warning:

"The call to connect on list of faces resulted in no actual connect operations."

And of course, symmetry faces are not connected at the end.

Do you know what it is happening?

Thank you very much

Acoidan

wjarrah March 15, 2010 07:57

I'm having the same problem with Periodic faces.

Can someone help us ?

Thanks

-mAx- March 15, 2010 09:24

I don't know if it helped the other member
http://www.cfd-online.com/Forums/ans...l-problem.html
Let me know if it helped

AcoidanBM March 15, 2010 09:31

Finally I followed that tutorial and dealed with the problem.

Thank you very much

complex September 30, 2016 08:11

problem converting from virtual to real edge
 
"The call to connect on list of faces resulted in no actual connect operations."
this above sentence is popping up when im converting a virtual edge toareal edge ...im new to gambit can anyone explain in simple words

-mAx- October 10, 2016 00:59

Converting virtual to real entities isn't good idea, because it will failed for sure.


All times are GMT -4. The time now is 02:17.