Problem connecting faces in Gambit

AcoidanBM · July 24, 2009, 15:05

Hi there,

I'm following the airplane Gambit tutorial to mesh my 3d automobile geometry, but I have a problem when I want to connect the symmetry faces. I don't know why, but sometimes it works well, and sometimes I get this warning:

"The call to connect on list of faces resulted in no actual connect operations."

And of course, symmetry faces are not connected at the end.

Do you know what it is happening?

Thank you very much

Acoidan

wjarrah · March 15, 2010, 06:57

I'm having the same problem with Periodic faces.

Can someone help us ?

Thanks

-mAx- · March 15, 2010, 08:24

I don't know if it helped the other member
http://www.cfd-online.com/Forums/ans...l-problem.html
Let me know if it helped

AcoidanBM · March 15, 2010, 08:31

Finally I followed that tutorial and dealed with the problem.

Thank you very much

-mAx- · October 10, 2016, 00:59

Converting virtual to real entities isn't good idea, because it will failed for sure.

July 24, 2009, 15:05	Problem connecting faces in Gambit	#1
AcoidanBM New Member Acoidan Betancort Mondesdeoca Join Date: Mar 2009 Posts: 14 Rep Power: 17	Hi there, I'm following the airplane Gambit tutorial to mesh my 3d automobile geometry, but I have a problem when I want to connect the symmetry faces. I don't know why, but sometimes it works well, and sometimes I get this warning: "The call to connect on list of faces resulted in no actual connect operations." And of course, symmetry faces are not connected at the end. Do you know what it is happening? Thank you very much Acoidan

March 15, 2010, 08:24		#3
-mAx- Super Moderator Maxime Perelli Join Date: Mar 2009 Location: Switzerland Posts: 3,297 Rep Power: 41	I don't know if it helped the other member http://www.cfd-online.com/Forums/ans...l-problem.html Let me know if it helped __________________ In memory of my friend Hervé: CFD engineer & freerider

October 10, 2016, 00:59		#5
-mAx- Super Moderator Maxime Perelli Join Date: Mar 2009 Location: Switzerland Posts: 3,297 Rep Power: 41	Converting virtual to real entities isn't good idea, because it will failed for sure. __________________ In memory of my friend Hervé: CFD engineer & freerider

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Converting Virtual Faces to Real Faces in Gambit	gstraw	Main CFD Forum	0	June 19, 2009 07:11
connecting walls in gambit	Amir Khodabandeh	FLUENT	0	March 30, 2007 14:17
Gambit error: cannot select faces and volumes	smillerhh	FLUENT	1	December 15, 2006 09:07
Error to re-open fluent case file	J.Gimbun	FLUENT	0	April 27, 2006 08:42
Startup Problem in Gambit 2.2 with WindowXP	Win Win Maw	FLUENT	3	January 25, 2006 11:09

March 15, 2010, 06:57		#2
wjarrah New Member Walid JARRAH Join Date: Nov 2009 Location: INSA de Rouen Posts: 14 Rep Power: 16	I'm having the same problem with Periodic faces. Can someone help us ? Thanks

March 15, 2010, 08:31		#4
AcoidanBM New Member Acoidan Betancort Mondesdeoca Join Date: Mar 2009 Posts: 14 Rep Power: 17	Finally I followed that tutorial and dealed with the problem. Thank you very much