[Other] Wind Turbine Geometry

universityne · August 21, 2009, 15:16

I am a graduate student at the University of Nebraska and am looking for wind turbine geometry file for a research project. We are hoping to use this 3d model to model a faulty condition like rotor imbalance, gearbox failure, or icing, etc. Where can I find a 3d geometry file for a wind turbine?

Thanks,

PSYMN · August 27, 2009, 14:02

You may get lucky, but I can tell you that my experience is that it is usually easier to just make your own model. Find a drawing or a picture and go from there...

sivarama1 · August 29, 2009, 06:17

Hi,
yes,give me your mail ID ,i will send one example of geometry of wind turbine

CFDtoy · November 18, 2009, 19:21

Hello there,
Could you kindly send me an example of wind turbine geometry (cfdtoy@hotmail.com) ?

Thanks!

CFDtoy

Quote:

Originally Posted by sivarama1

Hi,
yes,give me your mail ID ,i will send one example of geometry of wind turbine

palomar · November 19, 2009, 01:03

Hi,
I have a geometry of wind turbine blade in Gambit but I need one in ICEM_CFD
I can send mine if you like
my e-mail: paolocareer@hotmail.com

Quote:

Originally Posted by sivarama1

Hi,
yes,give me your mail ID ,i will send one example of geometry of wind turbine

sivarama1 · November 19, 2009, 05:57

hi all send to you,
Thanks.

CFDtoy · November 19, 2009, 11:38

Hi there,
Sure. Kindly send the gambit geometry to cfdtoy@hotmail.com

Thanks for your help.

/CFDtoy

Quote:

Originally Posted by palomar

Hi,
I have a geometry of wind turbine blade in Gambit but I need one in ICEM_CFD
I can send mine if you like
my e-mail: paolocareer@hotmail.com

CFDtoy · November 19, 2009, 11:39

Hello there,
I did not receive your geometry yet. Can you kindly re-send it to cfdtoy@hotmail.com?

Thanks again for your kind help.

CFDtoy

Quote:

Originally Posted by sivarama1

hi all send to you,
Thanks.

palomar · November 19, 2009, 12:11

I sent it to ur e-mail right now but I didn't receive yours

Quote:

Originally Posted by CFDtoy

Hi there,
Sure. Kindly send the gambit geometry to cfdtoy@hotmail.com

Thanks for your help.

/CFDtoy

CFDtoy · November 19, 2009, 13:07

Hi palo,
I dont have turbine mesh with me. I was requesting one from sivarama1. He indicated that he would send one to both of us. Thanks for your kind help.

Regards,

CFDtoy

Quote:

Originally Posted by palomar

I sent it to ur e-mail right now but I didn't receive yours

Zhaoyang1115 · January 7, 2010, 14:34

Quote:

Originally Posted by sivarama1

Hi,
yes,give me your mail ID ,i will send one example of geometry of wind turbine

Hi there:
Hope this message still works. Could you kindly send me the wind turbine geometry? My email address is zhaoyang1115@hotmail.com, I really appreciate your help. Thanks a lot

rohanpatil · January 10, 2010, 17:26

hi, this is rohan student at northern illinois university,
i am using ansys cfx to analyse a wind turbine, please can some body help me in finding a wind turbine geometry file

girishg · September 9, 2010, 12:30

Hi,

Can anyone send me wind turbine geometry? my email address is girshya@gmail.com
Where can I find info about different wind turbine geometries, can anybody please help me with this?
Thank you.

- Girish

rohanpatil · September 13, 2010, 11:20

my e-mail id is rsp0072009@yahoo.com, please send me the file on wind turbine

alienplanet · November 8, 2010, 15:02

Hi i'm senior student . This term i registered to Computational Fluid Dynamics lecture. And my lecturer wants us to do one of the cfd models at list that attached to the message. But i want to do cfd model of HAWT. I know that how i make a structured mesh but i haven't any geometry data about hawt. If anyone see the message , please contact me as soon as possible.

thank you

alienplanet · November 8, 2010, 15:04

Hi i'm senior student . This term i registered to Computational Fluid Dynamics lecture. And my lecturer wants us to do one of the cfd models at list that attached to the message. But i want to do cfd model of HAWT. I know that how i make a structured mesh but i haven't any geometry data about hawt. If anyone see the message , please contact me as soon as possible.

thank you

teguhtf · November 17, 2010, 05:29

Hi There,
Can you send me the Turbine file too?? my email is huget_teguh@ymail.com
Thank you!!

Teguh

ubaid · March 30, 2011, 03:41

Hello Everybody,

I hope this thread still works, can anyone please send me the geometry of wind turbine?

Thanks a lot in advance.

Best Regards,
Ubaid.

arghavan · October 6, 2011, 03:42

Quote:

Originally Posted by sivarama1

Hi,
yes,give me your mail ID ,i will send one example of geometry of wind turbine

Hi
I'm a student doing research on wind turbine.I need a profile of blade.kindly send me the gambit geometry to mohandes_girl_mh@yahoo.com
thanks for help.

whiteflower · February 25, 2012, 14:48

hi everybody,
I am a gratuate student.I like to create a 3d airfoil wing with taper and twist in gambit. I was tried to create 3d airfoil wing in gambit for CFD simulation. Can anyone help me out how can i do that.It's seems to me very complecated.Please, help me......Thanks.

whiteflower

August 21, 2009, 15:16	Wind Turbine Geometry	#1
universityne New Member Derek Join Date: Aug 2009 Posts: 1 Rep Power: 0	I am a graduate student at the University of Nebraska and am looking for wind turbine geometry file for a research project. We are hoping to use this 3d model to model a faulty condition like rotor imbalance, gearbox failure, or icing, etc. Where can I find a 3d geometry file for a wind turbine? Thanks,

August 27, 2009, 14:02	Home grown...	#2
PSYMN Senior Member Simon Pereira Join Date: Mar 2009 Location: Ann Arbor, MI Posts: 2,663 Blog Entries: 1 Rep Power: 47	You may get lucky, but I can tell you that my experience is that it is usually easier to just make your own model. Find a drawing or a picture and go from there...

August 29, 2009, 06:17	wind turbine geometry	#3
sivarama1 Member sivaramakrishnaiah Join Date: Mar 2009 Location: india,pondicherry Posts: 76 Rep Power: 17	Hi, yes,give me your mail ID ,i will send one example of geometry of wind turbine __________________ sivaramakrihnaiah

November 19, 2009, 05:57	wind turbine geometry	#6
sivarama1 Member sivaramakrishnaiah Join Date: Mar 2009 Location: india,pondicherry Posts: 76 Rep Power: 17	hi all send to you, Thanks. __________________ sivaramakrihnaiah

January 10, 2010, 17:26	wind turbine	#12
rohanpatil New Member rohan Join Date: Jan 2010 Posts: 5 Rep Power: 16	hi, this is rohan student at northern illinois university, i am using ansys cfx to analyse a wind turbine, please can some body help me in finding a wind turbine geometry file Last edited by rohanpatil; January 16, 2010 at 18:41.

September 9, 2010, 12:30		#13
girishg New Member Girish Gaikwad Join Date: Apr 2010 Posts: 11 Rep Power: 15	Hi, Can anyone send me wind turbine geometry? my email address is girshya@gmail.com Where can I find info about different wind turbine geometries, can anybody please help me with this? Thank you. - Girish

September 13, 2010, 11:20		#14
rohanpatil New Member rohan Join Date: Jan 2010 Posts: 5 Rep Power: 16	my e-mail id is rsp0072009@yahoo.com, please send me the file on wind turbine

November 8, 2010, 15:02		#15
alienplanet New Member talebe Join Date: Jul 2010 Location: Istanbul Posts: 8 Rep Power: 15	Hi i'm senior student . This term i registered to Computational Fluid Dynamics lecture. And my lecturer wants us to do one of the cfd models at list that attached to the message. But i want to do cfd model of HAWT. I know that how i make a structured mesh but i haven't any geometry data about hawt. If anyone see the message , please contact me as soon as possible. thank you

November 8, 2010, 15:04		#16
alienplanet New Member talebe Join Date: Jul 2010 Location: Istanbul Posts: 8 Rep Power: 15	Hi i'm senior student . This term i registered to Computational Fluid Dynamics lecture. And my lecturer wants us to do one of the cfd models at list that attached to the message. But i want to do cfd model of HAWT. I know that how i make a structured mesh but i haven't any geometry data about hawt. If anyone see the message , please contact me as soon as possible. thank you

November 17, 2010, 05:29	Can you send me the Turbine file too??	#17
teguhtf Senior Member teguh hady Join Date: Aug 2009 Location: Saga, Japan Posts: 222 Rep Power: 17	Hi There, Can you send me the Turbine file too?? my email is huget_teguh@ymail.com Thank you!! Teguh __________________ Now Or Never!!!

March 30, 2011, 03:41	Wind Turbine Geometry	#18
ubaid New Member Nadeem Join Date: Mar 2009 Location: München, Bavarian, Deutschland Posts: 24 Rep Power: 17	Hello Everybody, I hope this thread still works, can anyone please send me the geometry of wind turbine? Thanks a lot in advance. Best Regards, Ubaid.

February 25, 2012, 14:48	3-D airfoil wing model in gambit	#20
whiteflower New Member shubarna khan Join Date: Feb 2012 Posts: 1 Rep Power: 0	hi everybody, I am a gratuate student.I like to create a 3d airfoil wing with taper and twist in gambit. I was tried to create 3d airfoil wing in gambit for CFD simulation. Can anyone help me out how can i do that.It's seems to me very complecated.Please, help me......Thanks. whiteflower

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CFD analysis on wind turbine rotor	Ken (Wind Turbine CFD Super Rookie)	Main CFD Forum	45	February 9, 2016 14:07
CFX Analysis of a wind turbine	Bournegenius	CFX	16	August 20, 2012 19:16
wind turbine simulation problem	dennis0131	Main CFD Forum	4	November 22, 2010 04:26
[snappyHexMesh] 2D wind turbine airfoil (snappyHexMesh OR blockMesh)	openfoam1	OpenFOAM Meshing & Mesh Conversion	0	January 5, 2010 02:15
please help me to work on wind turbine	san	FLUENT	0	March 13, 2006 01:56