CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [GAMBIT] Install Gambit in Win Vista Ultimate (http://www.cfd-online.com/Forums/ansys-meshing/69201-install-gambit-win-vista-ultimate.html)

hector October 15, 2009 02:09

Install Gambit in Win Vista Ultimate
 
Hi

I buy a Laptop with operative system: Windows Vista Ultimate 64 bits, but when I install my exceed and my gambit appears a message, this message says:

Gambit build SP2006032921.
Warning : The current transport does not permit the attempted TCPIP connection.
TRANS(SocketINETGetAddr): tnamebysocket() failed
TRANS(SocketINETConnect): TRANS(SocketINETGetAddr) () failed
TRANS(Open): transport open failed for tcp/familiaalcalde:0
Unable to open display

Could you help me with that?

Thanks!

kovamaniac October 15, 2009 10:09

Which Exceed version did you use?

hector October 15, 2009 10:40

Quote:

Originally Posted by kovamaniac (Post 232760)
Which Exceed version did you use?

Hi

My Exceed version is: Exceed Hummingbird 2008

Regards

kovamaniac October 15, 2009 13:11

The Exceed version is proper. I also use it on Vista x64 Ultimate.

Try installing Gambit again, removing all the security limitations from firewall

hector October 16, 2009 02:08

Quote:

Originally Posted by kovamaniac (Post 232783)
The Exceed version is proper. I also use it on Vista x64 Ultimate.

Try installing Gambit again, removing all the security limitations from firewall

My friend

I remove all the security limitations from my fire wall, but the Gambit doesn't run

This message appear (I think that is other)

Locating Exceed installation ...
gambit failed in locating Exceed installation on your system.
Please try to start Exceed manually before you run gambit.
Starting C:\Fluent.Inc\gambit2.3.16\ntx86\gambit.exe -device open -id default_id400 -new ...
Gambit build SP2006032921.
Warning : The current transport does not permit the attempted TCPIP connection.
TRANS(SocketINETGetAddr): tnamebysocket() failed
TRANS(SocketINETConnect): TRANS(SocketINETGetAddr) () failed
TRANS(Open): transport open failed for tcp/familiaalcalde:0
Unable to open display

Please try to help me with that

PSYMN October 16, 2009 16:35

64 of one, 32 of the other?
 
I thought Gambit only supported Linux 64, not Windows 64? Are you running it as a 32 bit application?

hector October 17, 2009 02:34

Quote:

Originally Posted by PSYMN (Post 232972)
I thought Gambit only supported Linux 64, not Windows 64? Are you running it as a 32 bit application?

Hi

Well actually I try tu run Gambit and Exceed in 64 bit application, I have a friend who have Gambit in 64 bit application and it run perfectly.

Please try to help me with that guys...


All times are GMT -4. The time now is 03:14.