CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   ANSYS DesignModeler (http://www.cfd-online.com/Forums/ansys-meshing/69348-ansys-designmodeler.html)

Ema October 20, 2009 10:02

ANSYS DesignModeler
 
Hi everyone,

is someone using ANSYS DesinModeler with imported geometries?
I must include a .spt file in a created geometry, the problem is that i don't know how to delete the space occupied by this imported file from the previous geometry.

Does someone have some tip for me?
Ema

Garry October 23, 2009 04:34

Dear Ema
What do you mean with "the space occupied"
Garry

PSYMN November 2, 2009 20:24

History
 
In DM, you have a history tree on the left hand side...

In the tree is a branch with the import (probably at the top if you did that first). You can click on that and the details panel will show the settings for the import. You can use this to select a different file, adjust the import settings, etc.

You could also delete this branch from the tree if you don't want to import anything.

If the rest of the tree is dependent on that model, you will have a problem, but if the rest is free standing geometry creation, you will be fine with the update.

Simon

Ema November 3, 2009 04:37

Thank you very very much! :D

Ema


All times are GMT -4. The time now is 15:50.