CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[GAMBIT] Having trouble getting Gambit to mesh a box!

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 7, 2009, 07:44
Default Having trouble getting Gambit to mesh a box! [solved, please delete]
  #1
New Member
 
Join Date: Nov 2009
Posts: 1
Rep Power: 0
Tickers is on a distinguished road
This is probably an extremely simple problem, but it's got me completely beaten.

I've got a problem with trying to mesh some of the faces in my project. There are mesh points around all the edges of the faces, but when I select Mesh Faces the resulting mesh takes a line from every point to the bottom right corner, instead of creating a grid.

This doesn't happen on every face, but the faces it does happen on are all in line vertically.

I've tried replacing the meshes on the edges of the faces, but it has not worked.

edit: it's somehow fixed itself, which is a mixed blessing as now it works but I don't know what was causing it.

Last edited by Tickers; November 7, 2009 at 08:28. Reason: solved
Tickers is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Moving mesh Niklas Wikstrom (Wikstrom) OpenFOAM Running, Solving & CFD 122 June 15, 2014 06:20
Maximum no. of mesh fixed at 100k in Gambit? Peter FLUENT 5 July 16, 2008 20:44
Gambit: mesh size to small??? Ralf Schmidt FLUENT 1 January 28, 2006 02:26
3-D Mesh Check in Gambit..... SHR FLUENT 4 March 25, 2003 04:10
Gambit mesh pp CD-adapco 1 December 13, 2002 11:58


All times are GMT -4. The time now is 13:54.