CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

number of nodes and adapted lenghts

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 15, 2009, 05:05
Default number of nodes and adapted lenghts
  #1
New Member
 
Join Date: Nov 2009
Posts: 6
Rep Power: 7
fofo is on a distinguished road
Hello,

I have to state fully the mathematical problem of turbulence in a pipe including an orifice plate meter. I know inlet pressure, and Temp, diameters, turbulence lenght and turbulence intensity. My Re est 300000. I have decided to use the stanstard k-eps model, and a near wall model (even I don't know if I have to use near-wall model or wall functions, what is the difference? and do I have to replace all my equations or it's a new model just for the zone near of the wall??)
Secondly I have some difficulties with the boundary conditions? Do I have to five the velocity at inlet (U1, P1, k and eps)? Moreover how to find k and eps at the inlet, is it computed automatically??

Finally, I have to find the adapted lenghts before and after the orifice to have a fully developed flow, knowing my number of nodes should not exceed 10000, what does it mean? Apparently I have to reduce my first lenght L1 found thanks to the empirical equations L = 4.4 x Re^(1/6) x D and adapt my lenght to have a fully developed flow before and after the orifice but also a adapted grid.

Please, I need help.
Thanks so much
fofo is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
lenght and number of nodes for an orifice meter flow problem - k-eps model fofo FLUENT 0 November 15, 2009 04:49


All times are GMT -4. The time now is 13:00.