CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [GAMBIT] Need help regarding meshing in GAMBIT (http://www.cfd-online.com/Forums/ansys-meshing/70923-need-help-regarding-meshing-gambit.html)

bhanususarla December 9, 2009 18:23

Need help regarding meshing in GAMBIT
 
hi guys, i have a mesh with me which has 14400 cells. i would like to increase the number of cells to 28800 using gambit. are there any simple and direct tools to do this in gambit? thankyou.

-mAx- December 10, 2009 01:56

you cannot ask Gambit to reach a specific number of cells.
You can only set the element size.

mozaffar December 10, 2009 06:24

Hi,
you can use Split Quad Meshes command to make quadrilatral face mshe elements into triangular one.
in this way you can increase your mesh size drastically.
I hope it will be useful.:)

bhanususarla December 10, 2009 12:15

thank you mozaffar, max


All times are GMT -4. The time now is 07:29.