CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [TGrid] overlapping problem for stator and rotor blade (https://www.cfd-online.com/Forums/ansys-meshing/71420-overlapping-problem-stator-rotor-blade.html)

kennethaktuba January 1, 2010 02:31

overlapping problem for stator and rotor blade
 
Hi all,

I have a problem with compressor rotor and stator blade when combining both as one stage in an axial compressor design.

When I try to open profile.curve for my stator as Blade 2 ( rotor as Blade 1 in Objects treeview> Blade set), the error message come out on my computer screen such as below .

ERROR
Detected non-overlapping blades. Overlapping blades are required to calculate periodic interface.


Hopes somebody can help me to solve this problem.

Thanks.

Kenneth


All times are GMT -4. The time now is 04:46.