CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   Surface generation from points (http://www.cfd-online.com/Forums/ansys-meshing/71731-surface-generation-points.html)

PincoP January 13, 2010 06:35

Surface generation from points
 
Hi everyone,

We imported about 2000 terrain coordinates as points in the DesignModeler of Workbench. We are now trying to generate the terrain surface based on these points. Sadly we are still beginner and we don't know the right method to obtain the surface, for example by triangulation between the points.

Any help, short hints as well, will be appreciated!
Thank you very much

Shawn Givler January 13, 2010 15:19

Creating Surface Triangulation from Point Cloud
 
Try Geomagic Studio! It is designed and excells specifically for this task.

http://www.geomagic.com/en/


All times are GMT -4. The time now is 20:30.