geometry definition

antonio · January 25, 2010, 13:02

Hi all

I want to create a model composed of various surfaces. At the present stage I need to define something like a parable with base equal to 4.61 mm and "height" of 4 mm. How can I define this type of geometry (I have tried to see in tutorials examples but i did not saw an example of this type of geometry)?

Thanks for your recommendations.

-mAx- · January 26, 2010, 00:57

which software?

antonio · January 26, 2010, 04:05

Hi Max:

At the present moment I´m using the design modeler of ANSYS version 12.0.

Cheers

mic · February 3, 2010, 09:51

The Ansys modeler works like a CAD system, you have to sketch your geometry and than create the volume with the "extrude, revolve, etc" tools. If you're familiar with a cad tool you can easily use it and than import your model in the design modeler.

antonio · February 3, 2010, 10:52

Dear mic:

Thanks a lot for your comments. I have already solved my problem.

Regards

January 25, 2010, 13:02	geometry definition	#1
antonio Senior Member Join Date: Jan 2010 Posts: 110 Rep Power: 16	Hi all I want to create a model composed of various surfaces. At the present stage I need to define something like a parable with base equal to 4.61 mm and "height" of 4 mm. How can I define this type of geometry (I have tried to see in tutorials examples but i did not saw an example of this type of geometry)? Thanks for your recommendations.

January 26, 2010, 00:57		#2
-mAx- Super Moderator Maxime Perelli Join Date: Mar 2009 Location: Switzerland Posts: 3,297 Rep Power: 41	which software? __________________ In memory of my friend Hervé: CFD engineer & freerider

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] O-grid around wing geometry	Anorky	ANSYS Meshing & Geometry	15	November 27, 2017 13:43
Simulation of Flow through Complex 3D Geometry	EmersonKB	CFX	5	July 2, 2009 08:17
vitual _ real	deneb	FLUENT	3	January 22, 2007 04:31
Mixing plane geometry definition	Hbet	FLUENT	0	January 18, 2002 07:16
volute geometry definition	Derrik Mazzer	CFX	2	May 15, 2001 08:20

January 26, 2010, 04:05		#3
antonio Senior Member Join Date: Jan 2010 Posts: 110 Rep Power: 16	Hi Max: At the present moment I´m using the design modeler of ANSYS version 12.0. Cheers

February 3, 2010, 09:51		#4
mic New Member Join Date: Mar 2009 Location: Milan, Italy Posts: 12 Rep Power: 17	The Ansys modeler works like a CAD system, you have to sketch your geometry and than create the volume with the "extrude, revolve, etc" tools. If you're familiar with a cad tool you can easily use it and than import your model in the design modeler.

February 3, 2010, 10:52		#5
antonio Senior Member Join Date: Jan 2010 Posts: 110 Rep Power: 16	Dear mic: Thanks a lot for your comments. I have already solved my problem. Regards