Opening ICEM CFD directly from ANSYS

matheusguzella · January 21, 2010, 11:17

Hello,

Sorry if it's not the correct place to ask, but the university where I'm working changed the version of ANSYS (from 11.0 to 12.0). When I was using the 11.0 version I was able to open ICEM CFD directly from ANSYS (just opening ANSYS and then clicking on "Advanced meshing"). But now in version 12.0 I tried a lot but it seems that it's not possible. And this is my question: it's possible to open in version 12.0 like I was doing on 11.0 ?!?

Thanks anyway,
Matheus

PSYMN · January 22, 2010, 14:26

Nope, ICEM CFD was not included on the Workbench 12 Project page. There just wasn't time to add it properly to the new 12.0 schematic. You will have to open it stand alone...

However, the ability to read workbench files has been improved so you can more easily open workbench geometry and mesh files in ICEM CFD. (File => Workbench readers).

Simon

chw73 · February 21, 2010, 19:24

Does that mean if I wanna import STL format into ansys, that won't apply in ansys 12.0 due to the lack of ICEM CFD? I am trying to convert MRI files to solid model, then mesh. Do I have to install a standalone ICEM CFD to get this job done?

PSYMN · February 22, 2010, 10:37

It gets a bit confusing when someone says “into ANSYS”. Do you mean into the ANSYS Classic Solver (Aka ANSYS APDL or Black Window ANSYS) or into Workbench based ANSYS?

Workbench based ANSYS has never supported faceted data formats like STL (although it should in the next release, 13.0).

However, Workbench has an application (free) called “FE Modeler” that can bring in *CLEAN* faceted data and “Skin them” to turn them into Bspline geometry for Workbench.

But yes, your best bet for working with biomedical scan data in the ANSYS world is ANSYS ICEM CFD. It has tons of tools for repairing the geometry (if necessary), plus its patch independent meshers makes it easy to get a good mesh. We just uploaded some more biomedical tutorials (an artery and a femur) to the customer portal.

PSYMN · February 22, 2010, 10:38

I guess I should add that once the model is meshed in ICEM CFD, you can easily export it in a format that can be read into Classic ANSYS (directly) or into Workbench (thru FE Modeler)

chw73 · February 22, 2010, 10:47

Yap, I meant Ansys workbench 12.0. It seems that FE modeler can import STL file format. But as you said, ICEM CFD has a better tool to repair geometry, right? I may still wanna install ICEM CFD standalone, right? Thanks a lot.

PSYMN · February 22, 2010, 11:27

Right, it needs to be pretty clean for success with FE Modeler.

January 21, 2010, 11:17	Opening ICEM CFD directly from ANSYS	#1
matheusguzella New Member Matheus Guzella Join Date: Jun 2009 Posts: 12 Rep Power: 16	Hello, Sorry if it's not the correct place to ask, but the university where I'm working changed the version of ANSYS (from 11.0 to 12.0). When I was using the 11.0 version I was able to open ICEM CFD directly from ANSYS (just opening ANSYS and then clicking on "Advanced meshing"). But now in version 12.0 I tried a lot but it seems that it's not possible. And this is my question: it's possible to open in version 12.0 like I was doing on 11.0 ?!? Thanks anyway, Matheus

January 22, 2010, 14:26	Not at 12...	#2
PSYMN Senior Member Simon Pereira Join Date: Mar 2009 Location: Ann Arbor, MI Posts: 2,663 Blog Entries: 1 Rep Power: 47	Nope, ICEM CFD was not included on the Workbench 12 Project page. There just wasn't time to add it properly to the new 12.0 schematic. You will have to open it stand alone... However, the ability to read workbench files has been improved so you can more easily open workbench geometry and mesh files in ICEM CFD. (File => Workbench readers). Simon

February 22, 2010, 11:27	Right.	#7
PSYMN Senior Member Simon Pereira Join Date: Mar 2009 Location: Ann Arbor, MI Posts: 2,663 Blog Entries: 1 Rep Power: 47	Right, it needs to be pretty clean for success with FE Modeler.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
icem cfd ai environment 11.0, laptop keyboard problem, linux	pertupd	Hardware	3	October 3, 2011 08:27
ICEM CFD use for ?	Vu Trinh Tuan	CFX	14	April 11, 2011 18:38
Can I specify boundary conditon in icem cfd	Harry	Main CFD Forum	4	September 23, 2010 13:28
ICEM CFD 5.1 Hex-Tet mesh merging failure	bogesz	CFX	1	January 29, 2005 06:46
Free UK seminars: ANSYS CFD software	Gavin Butcher	CFX	0	November 23, 2004 09:13

February 21, 2010, 19:24		#3
chw73 New Member chenzhi wang Join Date: Feb 2010 Posts: 2 Rep Power: 0	Does that mean if I wanna import STL format into ansys, that won't apply in ansys 12.0 due to the lack of ICEM CFD? I am trying to convert MRI files to solid model, then mesh. Do I have to install a standalone ICEM CFD to get this job done?

February 22, 2010, 10:37		#4
PSYMN Senior Member Simon Pereira Join Date: Mar 2009 Location: Ann Arbor, MI Posts: 2,663 Blog Entries: 1 Rep Power: 47	It gets a bit confusing when someone says “into ANSYS”. Do you mean into the ANSYS Classic Solver (Aka ANSYS APDL or Black Window ANSYS) or into Workbench based ANSYS? Workbench based ANSYS has never supported faceted data formats like STL (although it should in the next release, 13.0). However, Workbench has an application (free) called “FE Modeler” that can bring in *CLEAN* faceted data and “Skin them” to turn them into Bspline geometry for Workbench. But yes, your best bet for working with biomedical scan data in the ANSYS world is ANSYS ICEM CFD. It has tons of tools for repairing the geometry (if necessary), plus its patch independent meshers makes it easy to get a good mesh. We just uploaded some more biomedical tutorials (an artery and a femur) to the customer portal.

February 22, 2010, 10:38		#5
PSYMN Senior Member Simon Pereira Join Date: Mar 2009 Location: Ann Arbor, MI Posts: 2,663 Blog Entries: 1 Rep Power: 47	I guess I should add that once the model is meshed in ICEM CFD, you can easily export it in a format that can be read into Classic ANSYS (directly) or into Workbench (thru FE Modeler)

February 22, 2010, 10:47		#6
chw73 New Member chenzhi wang Join Date: Feb 2010 Posts: 2 Rep Power: 0	Yap, I meant Ansys workbench 12.0. It seems that FE modeler can import STL file format. But as you said, ICEM CFD has a better tool to repair geometry, right? I may still wanna install ICEM CFD standalone, right? Thanks a lot.