CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[GAMBIT] Need Help

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 3, 2010, 02:48
Default Need Help
  #1
New Member
 
Hadi
Join Date: May 2009
Posts: 7
Rep Power: 8
hadi1984 is on a distinguished road
Hi, I am working with GAMBIT & FLUENT. I'd like to anlysis a fin-tube in heat transfer. I use Tri/Pave model for mesh in front and back sides in inner part and then use cooper mesh for volume mesh. When I gird check in FLUENT it has 2 errors and I don't understand the meaning of them:

1-outflow zone 6 has two adjacent cell zones.
2-mass-flow-inlet zone 8 has two adjacent cell zones

and because of these two reasons Grid check will fail.

Whould you please help me to know these 2 errors and how I can remove them.

Thanks
hadi1984 is offline   Reply With Quote

Old   February 4, 2010, 01:52
Default
  #2
Super Moderator
 
-mAx-'s Avatar
 
Maxime Perelli
Join Date: Mar 2009
Location: Switzerland
Posts: 2,961
Rep Power: 30
-mAx- will become famous soon enough
post a picture of your geometry in the neighborhood from your inlet and outler.
__________________
In memory of my friend Hervé: CFD engineer & freerider
-mAx- is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 19:15.