[ICEM] mesh creation

Birkov · February 3, 2010, 08:02

Hi to all,

I have question about mesh creation. I imported data from STL (box in box) file to ICEM. I would like to create mesh only between boxes (not in box inside) but I can't figure out how to do it. I checked manual and there is almost what I want, but only if I want just box inside all everythink.
Can anybody help?

Thank you very much.

B.

EDIT: I tried different file type (parasolid) and it works how I expected. But if it's any way how to solve problem which I described I will be happy. Thank you.

rwryne · February 3, 2010, 08:40

Make sure you create a material body within the area you want to be meshed. (It is the button to the right of the mesh button in the Geometry tab)

Birkov · February 3, 2010, 09:00

As I wrote I chose different file format and it works. I will continue on this way.
Thanks for quick reply.

February 3, 2010, 08:02	mesh creation	#1
Birkov New Member Join Date: Jul 2009 Location: Prague Posts: 28 Rep Power: 0	Hi to all, I have question about mesh creation. I imported data from STL (box in box) file to ICEM. I would like to create mesh only between boxes (not in box inside) but I can't figure out how to do it. I checked manual and there is almost what I want, but only if I want just box inside all everythink. Can anybody help? Thank you very much. B. EDIT: I tried different file type (parasolid) and it works how I expected. But if it's any way how to solve problem which I described I will be happy. Thank you. Last edited by Birkov; February 3, 2010 at 08:43.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dynamic Mesh Problem.	Tom Clark	FLUENT	10	June 21, 2021 04:27
Meshing aifoil in ICEM	student123a	ANSYS Meshing & Geometry	13	December 8, 2010 10:40
problem when converting mesh (made by ICEM) using fluentMeshToFoam	Forrest_Lei	OpenFOAM	11	October 16, 2009 06:28
2d irregular grid	Remy	Main CFD Forum	1	December 22, 2008 04:49
General questions on grid-based computing	Adrin Gharakhani	Main CFD Forum	21	June 5, 2000 13:47

February 3, 2010, 08:40		#2
rwryne Senior Member Ryne Whitehill Join Date: Aug 2009 Posts: 312 Rep Power: 18	Make sure you create a material body within the area you want to be meshed. (It is the button to the right of the mesh button in the Geometry tab)

February 3, 2010, 09:00		#3
Birkov New Member Join Date: Jul 2009 Location: Prague Posts: 28 Rep Power: 0	As I wrote I chose different file format and it works. I will continue on this way. Thanks for quick reply.