CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)
-   -   GAMBIT + win7 = Very slow performance (https://www.cfd-online.com/Forums/ansys-meshing/72967-gambit-win7-very-slow-performance.html)

rieuk February 23, 2010 07:12

GAMBIT + win7 = Very slow performance
 
Hi, using Gambit 2.4.6 with Exceed 2006 on Win 7.

Key error is: Warning: locale not supported by Xlib, locale set to C

As a consequence Gambit runs very slow on my machine - any ideas?

PSYMN February 24, 2010 09:46

Time lines...
 
Windows 7 came out after the last release of Gambit. This doesn't mean it won't run, but only that it could not have been tested .

I am not in Windows 7 yet, are there options (right click on the executable) to run in an XP mode?

They had something like that for Vista.

emreg September 5, 2017 01:29

Is there any solution for this topic?

johny0688 September 6, 2017 02:41

Yes there is, use ICEM :p

Ok, I remember I used X-ming instead of Exceed. It was faster but not perfect at all. However the newes version of Exceed should works perfect.


All times are GMT -4. The time now is 03:07.