|
[Sponsors] |
February 28, 2010, 04:11 |
mesh problem
|
#1 |
New Member
saeed
Join Date: Dec 2009
Posts: 12
Rep Power: 16 |
Hi evry body
I modeled a pem fuel cell in gambit but when I meshig it, 1 face does not mesh and I can't mesh same volume by quad type any one can help me?????????? |
|
February 28, 2010, 09:49 |
Hi
|
#2 |
New Member
mozaffar shekarchian
Join Date: Nov 2009
Posts: 6
Rep Power: 16 |
Hi Body
It is better to attach your geometry and mention your way to create it and also what meshing type and scheme do you want to execute to each face. It can make your problem more obvious. All the best |
|
March 1, 2010, 02:05 |
|
#3 |
Super Moderator
Maxime Perelli
Join Date: Mar 2009
Location: Switzerland
Posts: 3,297
Rep Power: 41 |
Take a look at this face, and check why the 2d-mesh failed.
Typical reason: small edges, etc...
__________________
In memory of my friend Hervé: CFD engineer & freerider |
|
August 7, 2012, 07:46 |
|
#4 |
New Member
|
guess what happenHistory repeat it self.
I have the same problem as you I am using the Fluent 14 and I want to simulate a PEM fuel cell. The only tutorial of PEM fuel cell of Fluent is from 6.3 version. I use it to Fluent 14 and I follow the steps but the results does not the same, also some data and parameters are different. Anybody know if the tutorial of 6.3 Fluent is working to Fluent 14 too? I think now you had finish your thesis peacefully. Can you help me to overcome my problems. Thank you Emad G. elemad1987@gmail.com |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Dynamic Mesh Problem. | Tom Clark | FLUENT | 10 | June 21, 2021 05:27 |
Gambit problems | Althea | FLUENT | 22 | January 4, 2017 04:19 |
Icemcfd 11: Loss of mesh from surface mesh option? | Joe | CFX | 2 | March 26, 2007 19:10 |
Convergence problem when ustructured mesh is used. | SangJin Ryu | Siemens | 3 | October 5, 2000 21:26 |
Mesh | Mignard | FLUENT | 2 | March 22, 2000 06:12 |