CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   2D Face Meshing Problem (http://www.cfd-online.com/Forums/ansys-meshing/74295-2d-face-meshing-problem.html)

aggie March 29, 2010 14:48

2D Face Meshing Problem
 
Hi,
When I want to mesh a 2D surface, an error will appear and it does not mesh it in Quad/Submap scheme,but I can mesh it with pave/tri schemes.
The error is "The number of intervals on the meshed face face.1 does not allow meshing with this scheme"

Anybody has an idea??

Thanks.

-mAx- March 30, 2010 01:01

Is your surface mappable? (does gambit choose automatically hex-mapp schema?)
a picture could be helpfull

aggie April 8, 2010 02:52

I figured it out. The problem was about some of my edge mesh. Thank you.


All times are GMT -4. The time now is 03:02.