CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] Import from Solidwork (http://www.cfd-online.com/Forums/ansys-meshing/74560-import-solidwork.html)

clucero April 3, 2010 11:37

Import from Solidwork
 
Dear all,
I have always used Gambit as preprocessor for buiding the geometry and mesh my sim,ullations models. Now I am trying to start some 3D models more complicated and I will work with Solidwork and ICEM Flow, and I have lot of doubts.

I want to import directly the geometry from SolidWorks but it seems as ICEM didn-t recognice that I have SolidWork on the computer.

I would like to know how I must configure ICEM to do it or how I could import the geometry.

Thaks a lot in advance :)

C. Lucero

ozbalabane April 6, 2010 15:13

Hello Lucero,

Not sure if you tried this one, but as i know, you should export (or save as) your SolidWorks data to ".IGS". Then on ICEM, you use "File>Import Geometry>STEP/IGES" command. This way you import your geo into ICEM. Hope it helps,

Ersin


All times are GMT -4. The time now is 14:39.