[ICEM] How to ICEM 12 outputs *.CFX5 file?

salzini · April 15, 2010, 13:24

I'm working on ICEM 11 tutorial and I should export ICEM 12's mesh to CFX.

I already selected [CFD++] for [Output -> select solver -> Output Solver pull down menu] but can't find such format options in File menu.

And It seemes ICEM 12 doesn't familiar with CFX anymore. (maybe not...I think

)

Is there easy way to interconnect ICEM 12 with CFX?

PSYMN · April 16, 2010, 12:07

The last icon in the output tab is to write out to your selected solver (don't go back to the file menu, that is just for dumping the mesh).

CFX was aquired by ANSYS inc 7 years ago... So since then versions of CFX are listed as "ANSYS CFX", which puts them higher on the list alphabetically.

Simon

salzini · April 17, 2010, 03:32

Yes, it works!

I was selected CFD++, but that was my miss reading of its manual.

Thanks.

April 15, 2010, 13:24	*How to ICEM 12 outputs .CFX5 file?**	#1
salzini New Member ji-ho Join Date: Mar 2010 Posts: 3 Rep Power: 16	I'm working on ICEM 11 tutorial and I should export ICEM 12's mesh to CFX. I already selected [CFD++] for [Output -> select solver -> Output Solver pull down menu] but can't find such format options in File menu. And It seemes ICEM 12 doesn't familiar with CFX anymore. (maybe not...I think ) Is there easy way to interconnect ICEM 12 with CFX?

April 16, 2010, 12:07	No problem...	#2
PSYMN Senior Member Simon Pereira Join Date: Mar 2009 Location: Ann Arbor, MI Posts: 2,663 Blog Entries: 1 Rep Power: 47	The last icon in the output tab is to write out to your selected solver (don't go back to the file menu, that is just for dumping the mesh). CFX was aquired by ANSYS inc 7 years ago... So since then versions of CFX are listed as "ANSYS CFX", which puts them higher on the list alphabetically. Simon

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
wmake compiling new solver	mksca	OpenFOAM Programming & Development	14	June 22, 2018 06:29
IGES/IGS format geometry file for icem meshing	littlelz	Main CFD Forum	0	May 27, 2008 18:24
Problem with rhoSimpleFoam	matteo_gautero	OpenFOAM Running, Solving & CFD	0	February 28, 2008 06:51
DecomposePar links against liblamso0 with OpenMPI	jens_klostermann	OpenFOAM Bugs	11	June 28, 2007 17:51
[blockMesh] Axisymmetrical mesh	Rasmus Gjesing (Gjesing)	OpenFOAM Meshing & Mesh Conversion	10	April 2, 2007 14:00

April 17, 2010, 03:32		#3
salzini New Member ji-ho Join Date: Mar 2010 Posts: 3 Rep Power: 16	Yes, it works! I was selected CFD++, but that was my miss reading of its manual. Thanks.