CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   DM: How to create multi-body part? (http://www.cfd-online.com/Forums/ansys-meshing/75460-dm-how-create-multi-body-part.html)

liu April 26, 2010 15:43

DM: How to create multi-body part?
 
I want to draw a multi-body part to better mesh each body. But how do I create that in DM? Each time I use "add material", it automatically merge into one body.

PSYMN April 28, 2010 12:00

Freeze/Unfreeze
 
Try "add frozen"...

A lot of new users have trouble with "Freeze/Unfreeze", but once you figure it out, you should be ok.

Go take a look in the help for "Freeze" or "Frozen".

Then once you have a collection of parts, you can right click in the model tree to create the multibody part and select the sub parts.

Simon


All times are GMT -4. The time now is 13:23.