CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   Connections of edges and faces between bodies (Workbench v12) (http://www.cfd-online.com/Forums/ansys-meshing/75462-connections-edges-faces-between-bodies-workbench-v12.html)

gexiste April 26, 2010 19:47

Connections of edges and faces between bodies (Workbench v12)
 
3 Attachment(s)
Hello everyone,
I am working on the seperation flow arround a prolate spheroid.

Goal of my project: - improve the meshing with a quad method to obtain good aspect ratio and good skewness. - target the separation flow very close to the prolate spheroid.

Method: - Split the global spherical volume in some quadrilateral sector as shown in the pictures. - Inflation meshing to see the boundary layer arround the body.

Main problem : How can I do to share every edges and faces between bodies? Right now the gap between them generate a different meshing both side of the interface.

The following pictures illustrate this project and this problem.

Thanks for your help.

PSYMN April 28, 2010 11:04

MultiBody Part
 
You need to combine the parts into a multibody part so that you will get conformal mesh...

You can do this in the geometry branch of the model tree.

Simon

gexiste April 29, 2010 16:57

Quote:

Originally Posted by PSYMN (Post 256702)
You need to combine the parts into a multibody part so that you will get conformal mesh...

You can do this in the geometry branch of the model tree.

Simon

thank you very much Simon , it works good like that

Julien


All times are GMT -4. The time now is 06:28.