CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] Guide to ansys (http://www.cfd-online.com/Forums/ansys-meshing/76440-guide-ansys.html)

ingmecc May 25, 2010 17:25

Guide to ansys
 
I'm looking for a good guide to ANSYS 12. Samone can help me?

PSYMN May 26, 2010 17:13

ICEM CFD Meshing tutorials
 
Do you mean ICEM CFD meshing tutorials? Search my posts, I have put up a link to the 11.0 tutorials many times. Those 11.0 tutorials will work almost as well for 12.0 or 12.1. If you have access to the customer portal, you can go in there to find other tutorials, demo movies, etc.

You can also find demos here (www.ansys.com/demoroom/) and a couple more here (www.youtube.com/ansysinc/)

Simon

PSYMN June 1, 2010 17:10

I had to find these today for someone else, so I might as well post here again also...

Customers will need to go online (Customer Portal) for the 12.0 tutorials, but you can have the 11.0 set in PDF form. 11.0 tutorials are still quite relevant although the 12.0 ones that were made are better (use them if you can).

Here is the PDF...

ftp://ftp.ansys.com/outgoing/simon/1...rialManual.pdf

and the files are here...

ftp://ftp.ansys.com/outgoing/simon/A...orialFiles.zip

Enjoy...

ingmecc June 2, 2010 05:45

Guide ansys
 
Thanks a lot!!!


All times are GMT -4. The time now is 12:29.