CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [GAMBIT] Changing Face mesh color (http://www.cfd-online.com/Forums/ansys-meshing/76543-changing-face-mesh-color.html)

ibuki May 28, 2010 06:44

Changing Face mesh color
 
Hello. I want to use some Gambit images in a presentation, and I changed the background color to white. Then I changed the face mesh color in the default setting from yellow to black; however, the face mesh color did not change. I tried remeshing the model after I changed the default setting, but it did not work, either. Does anybody have an idea how to change face mesh color?
Thank you.

-mAx- June 7, 2010 01:24

if your face belongs to a volume, and this volume is visible you need to change the mesh color of the volume.
Or you can disable the visibility of the volume, and display only outer surfaces on this volume. As only surfaces entities will be shown, you will be able to choose the right color


All times are GMT -4. The time now is 02:51.