CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   ICEM meshing question (http://www.cfd-online.com/Forums/ansys-meshing/77014-icem-meshing-question.html)

gsbhatia89 June 10, 2010 08:29

ICEM meshing question
 
*I Am sorry it made a double post...Please delete this one*

Hey everybody,

I had a question for a beginning mesher in ICEM

I have a complex 3d geometry that needs to be meshed properly. (Image is attached herewith)

http://img202.imageshack.us/i/crossmodel.png/

It is a long tube in which there is intersection of two tubes and there are five holes in this intersecting tubes through which fuel is injected into the main tube containing air.

I wished to ask you if it possible to somehow import parts from the ansys model into ICEM so as to make the meshing a little easier or do I have to completely the geometry from scratch in ICEM itself.

I would be really happy if somebody could let me know something about it..

Regards,
Gagan


All times are GMT -4. The time now is 22:12.