CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   export mesh from ICEM to CFX (http://www.cfd-online.com/Forums/ansys-meshing/77326-export-mesh-icem-cfx.html)

alinik June 20, 2010 09:00

export mesh from ICEM to CFX
 
hey guys

How can I export a mesh file created in ANSYS ICEM CFD to CFX for simulation?

Regards

feizaghaee June 20, 2010 09:49

hi ali
set the solver to Ansys CFX in icem and in CFX select icem cfd for importing mesh

alinik June 20, 2010 10:00

1 Attachment(s)
I can not produce a *.cfx, *.cfx5 or *.msh files in ICEM. I choose my "output solver" in output tab>select solver to be cfx-4 and the "common structural solver" is ANSYS.
The filles that are produced here are *.fbc *.atr and *.par
please the picture attached to see if I am doing correct

[IMG]file:///C:/DOCUME%7E1/AL26FF%7E1.I/LOCALS%7E1/Temp/moz-screenshot.png[/IMG][IMG]file:///C:/DOCUME%7E1/AL26FF%7E1.I/LOCALS%7E1/Temp/moz-screenshot-1.png[/IMG]

feizaghaee June 20, 2010 10:23

ok you didn't produce the input file you must write solver input file.

feizaghaee June 20, 2010 11:47

you must select ansys CFX instead of CFX-4 in first cascade menu

alinik June 20, 2010 14:38

thank you very much Mr. feizaghaee

It worked


All times are GMT -4. The time now is 08:45.