delta wing modeling

morteza08 · July 15, 2010, 13:27

hi how can i model a delta wing in gambit and fluent with a double wedged cross section.....

PSYMN · July 18, 2010, 16:16

It is very easy if you can handle wedges (prism elements) where the blocks are collapsed behind the airfoil... What is your solver?

morteza08 · July 18, 2010, 23:54

Quote:

Originally Posted by PSYMN

It is very easy if you can handle wedges (prism elements) where the blocks are collapsed behind the airfoil... What is your solver?

i do not know anything...
i have to model the geometry in gambit and model the supersonic flow around it in fluent..
i only can model airfoil in gambit and fluent
anybody can help me in modeling the wing

PSYMN · July 19, 2010, 09:41

Oops, sorry I missed that you had said the solver...

This is easy. You can send me your model and I will show you the steps...

First, create a mirror wedge behind the wedge that we can use for construction geometry.

PSYMN · July 19, 2010, 09:43

Quote:

Originally Posted by morteza08

i do not know anything...

I am happy to help with getting a topology like this, but you will probably also need to go thru the basic Hexa tutorials in order to implement my suggestions...

Simon

July 15, 2010, 13:27	delta wing modeling	#1
morteza08 Senior Member Morteza Join Date: May 2010 Location: Iran,Islamic Republic of Posts: 161 Rep Power: 15	hi how can i model a delta wing in gambit and fluent with a double wedged cross section.....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Plotting Cp vs z-cordinate on Delta Wing	Shamoon	FLUENT	0	December 31, 2007 09:31
Validation of Pitch moment for subsonic Delta wing	Riaan	Main CFD Forum	2	March 9, 2005 15:36
Delta Wing Structured Grid	Riaan	FLUENT	3	December 31, 2004 12:03
How to mesh a delta wing in the middle of a sphere	David	FLUENT	0	September 2, 2004 13:19
Aircraft wing modeling	serhat kilerci	FLUENT	0	January 13, 2001 14:51

July 18, 2010, 16:16		#2
PSYMN Senior Member Simon Pereira Join Date: Mar 2009 Location: Ann Arbor, MI Posts: 2,663 Blog Entries: 1 Rep Power: 47	It is very easy if you can handle wedges (prism elements) where the blocks are collapsed behind the airfoil... What is your solver?

July 19, 2010, 09:41		#4
PSYMN Senior Member Simon Pereira Join Date: Mar 2009 Location: Ann Arbor, MI Posts: 2,663 Blog Entries: 1 Rep Power: 47	Oops, sorry I missed that you had said the solver... This is easy. You can send me your model and I will show you the steps... First, create a mirror wedge behind the wedge that we can use for construction geometry.