CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   Ansys DesignModeler&DesignMesh (http://www.cfd-online.com/Forums/ansys-meshing/78784-ansys-designmodeler-designmesh.html)

Pavelko August 2, 2010 10:51

Ansys DesignModeler&DesignMesh
 
Hi ,

Do anybody uses the Ansys DesignModeler&DesignMesh sofware ?
I want to create and mesh a 2D pipe ? Can anybody help me to begin ?

Thanks ,
Pavelko .

PSYMN August 3, 2010 22:05

Tutorials
 
Start with the tutorials available in the customer portal...

I think the classic 2D Pipe junction tutorial is in there. There is one for each step of the process, Geometry, Meshing and Solve.

Jade M August 6, 2010 12:35

There is a very nice tutorial at
http://www.sdcpublications.com/pdfsa...03-269-7-1.pdf

Try that out to familiarize yourself with the software and then you should be able to construct your geometry since it is pretty simple.

I would suggest googling "DesignModeler tutorials" and "CFX tutorials" to find more information.

Good luck!

Pavelko August 8, 2010 05:26

Tanks you !


All times are GMT -4. The time now is 03:17.