CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] Weird legend (http://www.cfd-online.com/Forums/ansys-meshing/78824-weird-legend.html)

BrolY August 3, 2010 09:52

Weird legend
 
1 Attachment(s)
Hi guys,

I attached a picture which shows weird "blocks" around the vertices. Some are bigger than others. Does someone know what does it mean, and where does it come from ?

Thanks for your help,

AB

mvoss August 4, 2010 10:03

did you do some splitting on those edges?

neewbie

PSYMN August 4, 2010 10:44

Edge Splits.
 
Newbie will have to change his name... He is not a newbie anymore...;)

But yes, those are edge splits. You could move them or remove them. They help control edge curvature, but you don't really need them here (straight edge).

I notice that your sharp feature edge that has these edge splits is only surface associated, you should probably associate that edge to the curve... Always associate edges to curves if you have them...

Simon

BrolY August 5, 2010 04:24

Thanks ! I used the option "remove splits" to delete those "boxes".


All times are GMT -4. The time now is 00:09.