[ICEM] why is the edge color changed?

ringtail · September 1, 2010, 22:35

When I open the project, I will find the color of some edges have changed. As the following picture show, it changed to black.
1.jpg

But, if I turn off 'Edges' and then turn it on, the color will come back.

2.jpg
What's the matter?

And when I check the mesh quality, as the below picture show, there are some elements between 0.714717 and 0.72898075. But when I lighten the bar, I can't find anything. And the message is showed as below.
3.jpg
0.714717 -> 0.72898075, 1 values
0 elements

Anybody can help me? Thanks very much.

BrolY · September 2, 2010, 08:23

Open the ICEM help menu and search for 'move vertex'. You will find the explanation about the color of the edges. So, make sure you have associated all your curves with the good edge.

About the 'change color', I have never seen that before.
About the 'missing' element, try to convert your premesh into an unstructured mesh, and see if it happens again.

ringtail · September 2, 2010, 08:41

Quote:

Originally Posted by BrolY

Open the ICEM help menu and search for 'move vertex'. You will find the explanation about the color of the edges. So, make sure you have associated all your curves with the good edge.

About the 'change color', I have never seen that before.
About the 'missing' element, try to convert your premesh into an unstructured mesh, and see if it happens again.

hi BrolY, thanks for your reply.

I have checked the ICEM hlep (v12.0), but it doesn't mention the 'black color' edges. And I'm sure all the edges have been associated with right curves. What's more, I have converted the mesh into unstructured mesh for FLUENT v12, and the mesh works well.

Then, about the 'missiong' element, It has already been convert into unstructured mesh. When I check the premesh, everything seems good.

BrolY · September 2, 2010, 09:57

When the edges are black, it means that they haven't been associated with any curves and that there are no constrains on the edges.
For the example, when you creat your first block, the edges are black.

About the missing element, could it be an edge or something like that? Anyway, your mesh quality is very good (> O.7 is nice. usually, > 0.3 is good for almost all solvers), so I guess it's not an issue.

PSYMN · September 2, 2010, 15:14

That is strange (about the 0 elements)... What metric were you using?

As for the edge changeing colors from blue (volume edges) to black (surface associated), I don't have enough info to guess. Are those edges supposed to be in the volume or on the surface? And I have no idea why the color would change.

But in the end, it seems like your quality is very good and you can move on.

September 1, 2010, 22:35	why is the edge color changed?	#1
ringtail Member Join Date: Dec 2009 Location: China Posts: 79 Rep Power: 16	When I open the project, I will find the color of some edges have changed. As the following picture show, it changed to black. 1.jpg But, if I turn off 'Edges' and then turn it on, the color will come back. 2.jpg What's the matter? And when I check the mesh quality, as the below picture show, there are some elements between 0.714717 and 0.72898075. But when I lighten the bar, I can't find anything. And the message is showed as below. 3.jpg 0.714717 -> 0.72898075, 1 values 0 elements Anybody can help me? Thanks very much.

September 2, 2010, 15:14	Sorry, I dont know what the problem is, but at least it is not stopping you.	#5
PSYMN Senior Member Simon Pereira Join Date: Mar 2009 Location: Ann Arbor, MI Posts: 2,663 Blog Entries: 1 Rep Power: 47	That is strange (about the 0 elements)... What metric were you using? As for the edge changeing colors from blue (volume edges) to black (surface associated), I don't have enough info to guess. Are those edges supposed to be in the volume or on the surface? And I have no idea why the color would change. But in the end, it seems like your quality is very good and you can move on.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Meshing a Sphere	Ajay	FLUENT	10	September 3, 2016 14:18
Actuator disk model	audrich	FLUENT	0	September 21, 2009 07:06
Where's the singularity/mesh flaw?	audrich	FLUENT	3	August 4, 2009 01:07
fluent add additional zones for the mesh file	SSL	FLUENT	2	January 26, 2008 11:55
[Commercial meshers] Star mesh import problem	chris1980	OpenFOAM Meshing & Mesh Conversion	20	May 8, 2006 01:07

September 2, 2010, 08:23		#2
BrolY Senior Member AB Join Date: Sep 2009 Location: France Posts: 323 Rep Power: 21	Open the ICEM help menu and search for 'move vertex'. You will find the explanation about the color of the edges. So, make sure you have associated all your curves with the good edge. About the 'change color', I have never seen that before. About the 'missing' element, try to convert your premesh into an unstructured mesh, and see if it happens again.

September 2, 2010, 09:57		#4
BrolY Senior Member AB Join Date: Sep 2009 Location: France Posts: 323 Rep Power: 21	When the edges are black, it means that they haven't been associated with any curves and that there are no constrains on the edges. For the example, when you creat your first block, the edges are black. About the missing element, could it be an edge or something like that? Anyway, your mesh quality is very good (> O.7 is nice. usually, > 0.3 is good for almost all solvers), so I guess it's not an issue.