CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] STL file to IGES (http://www.cfd-online.com/Forums/ansys-meshing/80289-stl-file-iges.html)

rana41671 September 21, 2010 16:27

STL file to IGES
 
Hello Everyone,

I am trying to extract a IGES geometry file from a STL geometry in ICEM. Here is what I tried so far.

1. Imported STL geometry into ICEM
2. Extracted surfaces & curves from STL file.

After this ICEM allows me to save *tin file. I used this *.tin file to export IGES geometry but for some reason it comes out as blank. It works fine for other *tin files given as examples/tutorials but doesn't work for STL files.

Has anybody tried this before? Any help/ideas will be appreciated.

Thanks
Sandeep


All times are GMT -4. The time now is 20:47.