CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   Problem with ICEM and Fluent: Automatically created Regions within the domain (http://www.cfd-online.com/Forums/ansys-meshing/80395-problem-icem-fluent-automatically-created-regions-within-domain.html)

sandmike_83 September 24, 2010 05:42

Problem with ICEM and Fluent: Automatically created Regions within the domain
 
Hello to everybody.

I was used to mesh in ICEM using hexa mesh with blocking strategy and O grid. Then to export the resuls to CFX I used patran (.out) like output solver (with automatically creations of named boundaries activated). No problems with that.

Now, I changed to fluent 6.3.26 (budget cut), and I need to use output solver: Fluent_V6. However, when I use this option, when i visualize the final mesh in fluent the mesh has regions whenever there are blocking junctions (even in the interior of the body).

For the latest version of fluent I believe that there should be no problem since they have added an option called: "interior". But for version 6.3.26 there is not such an option and It assigns automatically a wall to it.

Any ideas? thanks in advance

Michael


All times are GMT -4. The time now is 20:25.