|September 24, 2010, 05:42||
Problem with ICEM and Fluent: Automatically created Regions within the domain
Join Date: Aug 2010
Posts: 4Rep Power: 6
Hello to everybody.
I was used to mesh in ICEM using hexa mesh with blocking strategy and O grid. Then to export the resuls to CFX I used patran (.out) like output solver (with automatically creations of named boundaries activated). No problems with that.
Now, I changed to fluent 6.3.26 (budget cut), and I need to use output solver: Fluent_V6. However, when I use this option, when i visualize the final mesh in fluent the mesh has regions whenever there are blocking junctions (even in the interior of the body).
For the latest version of fluent I believe that there should be no problem since they have added an option called: "interior". But for version 6.3.26 there is not such an option and It assigns automatically a wall to it.
Any ideas? thanks in advance
|fluent, hexa mesh, icem, interior regions|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Problem with 2D ICEM mesh check in fluent||Nicola||FLUENT||3||March 25, 2013 06:56|
|[ICEM] Meshing problem from ICEM CFD to Fluent||cfdonlinederafa||ANSYS Meshing & Geometry||2||September 21, 2010 16:16|
|problem exporting from icem to fluent||jc_muaddib||FLUENT||1||June 16, 2010 04:16|
|Icem to FLUENT problem||Babak||FLUENT||0||June 10, 2010 17:14|
|Problem in IMPORT of ICEM input file in FLUENT||csvirume||FLUENT||2||September 9, 2009 01:08|