CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [GAMBIT] Splitting of existing mesh on a source face is not implemented (http://www.cfd-online.com/Forums/ansys-meshing/82541-splitting-existing-mesh-source-face-not-implemented.html)

ritwik November 29, 2010 07:55

Splitting of existing mesh on a source face is not implemented
 
Dear All,
As the name suggests, while meshing a volume with Cooper method (interval count = 50), I am getting this error : Splitting of existing mesh on a source face is not implemented

I am following the following procedure:
1. Making the geometry.
2. Making boundary layers on faces.
3. Attaching meshes to the faces.
4. Trying to mesh the volume bounded by the the 6 surfaces (3 of those surfaces are used as source faces)

The error occurs for one source face. Please help!
Thank you!


All times are GMT -4. The time now is 10:32.