CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   how to contact multi fluid region in ansys DM (http://www.cfd-online.com/Forums/ansys-meshing/83844-how-contact-multi-fluid-region-ansys-dm.html)

oilsok January 13, 2011 02:11

how to contact multi fluid region in ansys DM
 
I did generate a mesh in multibody (same fluid).

but

geometry is very complex. so I devided a many part.




but..


fluent read

each part have wall.


what can I do for this problem.

sorry. I can't english very well

PSYMN January 14, 2011 18:06

Multibody parts
 
If you have separate bodies, they will each meet separately. What you need to do is go into DM, select all the parts and right click to create a multi-body part.

This will mesh the assembly with conformal mesh. Then Make sure to put all the bodies in the same named selection so that they appear as one cell zone in FLUENT.


All times are GMT -4. The time now is 23:38.